|
PRODUCTS
::
The
products AEE promotes in the market are
an apt demonstrator of its concern for the
Indian Industry. These products are our
continued pursuit to promote environmental
friendly technology. A separate subsidiary
- Energy Conservation Company was floated
to make available world-class energy conservation
and safety products to the Indian Industry.
STATIC
GROUNDING SYSTEMS ~>
Cenelectrex
Static Grounding Systems have been developed
to provide security in safety critical applications,
where flammable products are being transferred
at high velocity, or wherever there is a
real danger of isolated objects becoming
highly charged in hazardous atmospheres.
All systems utilize certified intrinsically
safe monitoring circuits, and provide switch
contact outputs which may be interlocked
with process control or alarm systems as
well as visual indication of earth condition.
Earth
- Rite PLUS ~>
Earth
- Rite PLUS Dual Mode ~>
Designed to prevent static accumulation
and discharge during road tanker filling
and discharging, the Earth - Rite PLUS Dual
Mode ensures that correct bonding and grounding
procedures are carried out before the transfer
process begins. The Earth - Rite PLUS Dual
Mode carries out a unique "tanker verification"
check before going over to monitor the static
earth path. The system only becomes permissive
when these two conditions are within correct
parameters, thereby eliminating the potential
for operator error. Local indicator lights
confirm the tanker/earth condition to the
operator, whilst the internal voltage free
switch contacts may be interlocked with
pumps, valves, alarms etc.
Earth
- Rite PLUS Single Mode ~>
For many other flammable material transfer
applications involving fully conductive
items of plant (drums, IBC's, vessels, rail
tankers etc) the Earth - Rite PLUS Single
Mode monitors the static earth path down
to an acceptably low level according to
international static control requirements.
Indicator lights confirm the earth condition
to the operator, whilst the internal voltage
free switch contacts may be interlocked
with pumps, valves, alarms etc.
Earth
- Rite FIBC ~>
"Type C" static dissipative FIBCs
(Big Bags) are commonly used in the chemical
and processing industries to prevent dangerous
levels of static accumulation which may
result in electrostatic discharge from the
surface of the container and adjacent objects/operators
becoming charged by induction. The Earth
- Rite FIBC ensures that the container is
correctly grounded and within the correct
surface resistivity range before material
filling/discharging commences. The resistance
monitoring range of the system enables it
to also be used with other "static
dissipative" materials such as flexible
linings and hoses etc.
Earth
- Rite MULTIPOINT
~>
For plant and machinery
where there are several pieces of potentially
isolated conductive materials, the Earth
- Rite MULTIPOINT provides monitoring and
static earthing of up to 8 channels, with
operator feedback and interlock(s). Typical
applications include fluid bed dryers, filling
and discharge equipment, ductwork system,
conveying systems and many others where
part(s) of the assembly must be disconnected
periodically. The system maintains hazardous
area and operator safety at all times by
operating from a single intrinsically safe
power supply.
Earth
- Rite OMEGA ~>
The Earth - Rite OMEGA enables engineers,
contractors and OEMs to incorporate dedicated
static earth monitoring as part of large
plant instrumentation and control systems.
The Earth - Rite OMEGA module has been
designed for rail mounting (35mm DIN standard)
into control panels, and is capable of
checking resistance between two applications
include temporary ground condition monitoring
of all mobile conductive plant items and
permanent continuity monitoring of fixed
plant items in Zone 0, 1 & 2 flammable
atmospheres, as well as monitoring simple
devices such as float switches in hazardous
areas.
Bond
- Rite
~>
The intrinsically safe
static grounding clamp that tests itself:
Many standard grounding clamps in use today
show very high resistance readings when
clamped onto conductive objects with insulating
surfaces. This may result in the clamp being
physically attached in the eyes of the operator,
but not actually performing its intended
function (i.e.: dissipating static safely)
The Bond - Rite clamp provides enhanced
safety and security by continuously testing
the connection onto the object, and providing
visual verification of this condition back
to the operator
SMARTWATCH
AND INTELLIGENT VALVES
~>
Grounding
& Bonding Clamps and Cables
~>
Cenelectrix
clamps and cables are designed to enable
users to achieve and effective connection
to portable / mobile items of plant in
order to safely dissipate static electricity.
All items combine extremly low electrical
resistance with high level of mechanical
strength.
Smartwatch
is a continuous electronic leak detection
system which utilizes Sensors and microprocessor
within a communication network or local
indication.
Smartwatch
sensors use the following technology for
detection ~>
Specifically,
Smartwatch can be used for the detection
of gas or steam for any normally-closed
valve.
For
steam traps, measurement is via ultrasonic
technology. In addition, a Temperature sensor
can detect fail closed or blocked steam
traps for bi-therm Steam traps. An alarm
is generated when the value of any parameter
is over or below the Set point. Set points,
time settings, sampling periods etc. Are
programmable for a specific valve or steam
trap. The moment the valve of any signal
exceeds the alarm set point the Microprocessor
will generate an alarm signal. All detection
is performed in real Time. The network is
designed for self-monitoring and will generate
alarms if the System fails.
The
system generally consists of the following
~>
- local
alarm
- remote
alarm
- bi-directional
bus
- half
duplex communications
- modbus
compatibility
- remote
configurable setpoints on device
- remote
configurable performance on device
- data
base for appropriate handling of required
information
- about
device operation in real time.
Product
application ~>
- monitoring
of mechanical devices (steam traps, relief
and safety valves, control valves, on-off
valves etc.)
- dangerous
gas leak detection
- prevention
of contamination and environmental pollution
Product
description ~>
Smart
watch is a universal monitoring system based
on an electronic analyzer, which is able
to monitor up to two independent parameters
at a time. The system is controlled by a
microprocessor.
Options
available are ~>
- stand
- alone mode or network mode
- solar
energy or conventionally powered.
- wireless
or conventional installation
- wire
or RF transmission link to PC
- normal
or intrinsically safe
Smart
watch is externally fitted to steam traps
or valves without requiring additional equipment.
The system performs intelligently all its
functions detecting even its own failure.
Intelligent
On-Off Control Valves ~>
Reducing
production costs and protecting the environment
Immediate detection of process fluid gas
to flare.
Intelligent Steam Trap ~>
No
steam loss, 15 % higher efficiency and up
to 10 years warranty.
Its
main characteristics are ~>
- System's
self - diagnostic
- Continuous
detection of live steam leaks
- Continuous
detection of flash steam formation
- Continuous
detection of excessive condensate accumulation
- Correction
possibility of live steam leaks while
in operation
- Reduction
of flash steam formation while in operation
- Discharge
temperature adjustment while in operation
- Reduction
of inspection and maintenance costs
|